weBoost 3G/4G/LTE Direct Connect Amp is Available
weBoost (formerly Wilson Electronics) has introduced their Signal 4G M2M Direct Connect Inline Cellular Amplifier/Booster. In locations where cellular signals are weak due to distance from the cell site, terrain features, or building materials like concrete and steel, the Signal 4G provides a strong, reliable signal.
- Bi-directional signal booster amplifies signal up to 15 dB to and from cell site
- Connects to modem and antenna using standard SMA connectors
- Compatible with all North American cellular providers (AT&T, Sprint, T-Mobile, Verizon, Bell, Rogers, Telus, etc)
The Signal 4G M2M is the perfect companion for the LAN-Cell or PocketPORT in signal challenged environments.
Part # ANT-151-470119 @ $249.99
Proxicast's High-Gain 3G/4G/LTE Yagi Antenna
Proxicast has added a High-Gain Yagi Directional Antenna to its line-up of "universal" wide-band antennas.
For use directly with modems or signal boosters in area of low cellular signal coverage, our Yagi provides up to 11 dBi of gain in all of the 2G, 3G, 4G, LTE, xLTE, AWS, GSM & CDMA bands worldwide. It also works with 2.4 GHz Wi-Fi and 900 MHz unlicensed systems.
It small size, light weight and wide beam-width make it easy to install. The weatherproof enclosure protects the antenna's internal elements.
- Works on any cellular network worldwide
- Small (11.5 x 8 x 4.73 inches) and light-weight (28 oz)
- 60 degree horizontal beam-width makes orientation less critical
- Includes pole/wall mounting hardware
- 12 inch N Female pigtail
Part # ANT-128-001 @ 69.00
OpenSignal Cell Tower Database
When planning your LAN-Cell or PocketPORT installation, it is often helpful to know which carriers have the best signal at your location and where their towers are located. OpenSignal has built one of the most comprehensive independent databases of cellular towers and coverage area. Check out their free web site and smartphone app to determine if you'll need a booster or high-gain antenna before you go on site. It's a "must have" app when installing directional antennas!
PocketPORT 2 Firmware v2.2.41 Released
Firmware v2.2.41 for the PocketPORT 2 has been release. The most significant change in this release is auto-configuration of several additional USB modems. Note that beginning with firmware v2.2.38, PocketPORTs running in Virtual Cable Mode can only communicate with other PocketPORTs running the same or later firmware due to a change in the Virtual Cable security protocols.
Download Version v2.2.41