|FAQ ID # 282|
|Last Update : 2017/08/03
Rating : Not Rated
Send FAQ by E-mail
Add to favorites
Print this FAQ
Social Bookmark this Article :
|Question / Issue|
|Using the ZTE MF861 (AT&T Velocity USB Stick) with the PocketPORT 2|
|Answer / Solution|
|When using the ZTE MF861 modem in a PocketPORT 2 which is configured for NAT Router mode operation, the LAN IP & subnet of the PocketPORT must be changed from its default value of 192.168.1.1 / 255.255.255.0.
The MF861 is factory programmed to use the IP address 192.168.1.1; the current MF861 firmware does not allow this value to be changed. Therefore, you must change the IP address/subnet of the PocketPORT to avoid an IP conflict. For example, change the PocketPORT's LAN IP to 192.168.2.1.
No PocketPORT configuration changes are necessary for IP Pass-Through mode (the default) or for Virtual Cable mode operation.
Note: Support for the MF861 modem was introduced in PocketPORT firmware release 2.2.90.
|PocketPORT Firmware Updates
Download the latest PocketPORT firmware
|Direct Link to This FAQ|